Basic HTML Version
A·14876·R-3
Flipper Assembly
120
12
<;~
Item Part Number
Description
Item Part Number
Description
1 A-14877-R
Flipper Base Assembly, Right
18 A-15848-R
Crank Link Assembly, Right
2 SW-1A-194
Switch Assembly
a) A-17050-R
Flipper Crank Assembly, Right
3 4701-00002-00
Lockwasher #6 Split
b) A-15847
Flipper Link Assembly
4
4105-01019-10
Sh. Metal Screw, #5 x
5/8"
c) 02-4676
Link Spacer Bushing
5 4008-01079-05
Mach. Screw, 8-32 x
5/16"
d) 4010-01086-14
Cap Screw, 10-32 x
7/8"
6 4701-00003-00
Lockwasher #8 Split
e) 4700-00023-00
Flat Washer, 5/8 x
13/64
x 16ga.
7 01-9375
Switch Mounting Bracket
f) 4701-00004-00
Lockwasher #10 Split
8 20-6516
Speednut, Tinnerman
g)
4410-01132-00
Nut 10-32 ESN
9
401 0-01 066-06 Cap Screw, 10-32 x
3/8"
19 23-6577
Bumper Plug, 5/8"
10 4701-00004-00
Lockwasher #10 Split
20 03-7568
Flipper Bushing
11 A-12390
Flipper Stop Assembly
12 FL-11629
Flipper Coil, Blue
a)
03-7066-5
Coil Tubing
Associated Parts:
13 01-7695
Solenoid Bracket
14 4006-01 017 -04 Mach. Screw, 6-32 x 1/4"
(Not Shown)
15 10-364
Spring
16 4006-01005-06
Mach. Screw, 6-32 x 3/8"
21 23-6695
Flipper Rubber Ring, Red
17 4406-01117 -00 Nut 6-32 Hex.
22 20-9250-6
Flipper w/Shaft Yellow
Flipper Notes ...
1. Each Flipper Assembly
is
mounted beneath the playfield,
in
conjuction with the Plastic Flipper
&
Shaft, and Flipper Rubber on the upper side of the playfield.
2. With the flipper, in the non-sctiveted position, the £,O.S. Switch contacts must have
a
gap of ,062 (±,015) inch. When flipper is activated switch must close.
3. Any adjustment of the E.
O. S.
switch must be made at
a
minimum distance of 0.25 inch from the switch body.
4, Longer blade of EO.S. switch must be made straight. Gap adjustment is done by adjusting snorter blade.
S.
All moving elements of the assembly must operate freely without any evidence of binding.
6.
Apply Loctite
TO.
245
when reataching screws
to
the Flipper Stop Assembly. the Solenoid Bracket, and the Flipper Bushing.
2-13