Basic HTML Version
T.8 Single Lamp Test
For all lamps, the number on the left indicates the column, the number on the right
indicates the row. Example- Lamp 23 means 2nd column, 3rd row.
Once the test name is shown under the Test Menu, press the Enter button. This test allows you
to test each lamp circuit individually. Press the Up or Down button to cycle through this test.
For each name and number that is shown in the display the corresponding lamp should light.
Any other results indicates the system has detected a problem. Press the Start button to obtain
wire color, connector, and fuse information when the desired lamp is lit.
Press the Escape button to return to the Test Menu. Press the Up button to diSplay the next test,
(or the Down button to return to a previous test). Press the Enter button to activate that test.
T.9 All Lamps Test
Once the test name is shown under the Test Menu, press the Enter button. ThiS test causes all
the controlled lamps to flash at the same time. Every controlled lamp should flash. Any other
results indicates the system has detected a problem.
Press the Escape button to return to the Test Menu. Press the Up button to diSplay the next test,
(or the Down button to return to a previous test). Press the Enter button to activate that test.
T.IO Lamp and Flasher Test
Once the test name is shown under the Test Menu, press the Enter button. This test causes all
the flashlamps and the controlled lamps to flash at the same time. The controlled lamps
blink, while the flashlamps cycle from highest to lowest. Any other results indicates the
system has detected a problem.
Press the Escape button to return to the Test Menu. Press the Up button to display the next test,
(or the Down button to return to a previous test). Press the Enter button to activate that test.
T.11 Display Test
Once the test name is shown under the Test Menu, press the Enter button.
This test
automatically turns On and Off every dot in the Dot Matrix DiSplay. A series of patterns appear
in sequence. The patterns start with one line, turned On, moving across the screen vertically,
then horizontally,
The screen inverses and one line, turned Off, moves across the screen
vertically. then horizontally. The second pattern is a series of lines, turned On. moving across
the screen diagonally. The screen inverses and there is a series of lines, turned Off, moving
across the screen diagonally. The third pattern is gndlmes turned On, then turned Off. The
last pattern is a box forming an outline of dots around the matrix that are turned On. After the
box outline the test repeats itself.
Press the Escape button to return to the Test Menu. Press the Up button to display the next test,
(or the Down button to return to a previous test). Press the Enter button to activate that test.
Press the Escape button to return to the Test Menu. Then. either press the Up or Down button to
return to a previous Test, or press the Escape button again to return to the Main Menu. Once in
the Main Menu. press the Up button to move to the next menu selection. the Utilities Menu. or
press the Down button to return to a previous Main Menu selection.
Hurricane 1-16