Basic HTML Version
Either press the Enter button to return to the Repeat mode or. press the Escape button to return
to the Test Menu. Once in the Test Menu. press the Up button to display the next test. (or the
Down button to return to a previous test). Press the Enter button to activate that test.
T.6 General mwnination
Once the test name is shown under the Test Menu, press the Enter button. This test allows you
to check all of the General Illumination circuits. There are two modes of operation, Stop and
Run. To obtain wire color, driver number, connector. and fuse information. press the Start
button when the desired General Illummation circuit appears in the display.
Stop - Press the Up or Down buttons to cycle through the General Illumination Test manually.
All fllumtnation is tested first, followed by an individual circuit test. The circuit name
and number shows in the display while the corresponding lamps lights. If any other
results occur the system has detected an error.
Run - Press the Enter button any time during Stop mode and the General Illummatlon
Test cycles through automatically. For each circuit shown in the display the
corresponding bulbs should light. If any other results occurs the system has detected a
problem.
Either press the Enter button to return to Stop mode. or the Escape button to return to the Test
Menu. Once in the Test Menu press the Up button to advance to the next test. (or the Down
button to return to a previous test). Press the Enter button to activate that test.
T.7
SOWld and
Music Test
Once the test name is shown under the Test Menu, press the Enter button. The Sound and MuSiC
Test allows you to check the audio circuits. This test has three modes for testing the sound and
music circuits. Running. Repeat and Stop.
Running mode steps through a sequence of sounds and music. Pressing the Up or
Down button during this portion of the Sound and MuSiCtest allows you to
advance to a particular sound or tune without having to wait for the program to
play all the sounds available in the test. A sound or tune should be heard for
each name and number that appears in the display. Any other results
indicates the system has detected a problem.
Press the Enter button at any time during the Running mode to cause the
program to stop and repeat a particular sound or tune. The same sound should
repeat continuously until the Up or Down button is pressed. Any other results
indicates the system has detected a problem.
Press the Enter button at any time during the Repeat mode to stop this test
altogether. Nothing should be heard. Any other results indicates the system has
detected a problem.
Use the Enter button to return to the Running test mode, or the Escape button to return to the
Test Menu. Once in the Test Menu press the Up button to display the next test, (or the Down
button to return to a previous test). Press the Enter button to activate that test.
Running -
Repeat -
Stop -
Hurricane I-US