Basic HTML Version
Lower Right Flipper
pin
C-11626-R-3
Item Part No.
1 HW-3001S-6
2 03-7520-2
3 20-6516
4 5045-1209S-00
5 RM-21-06
6 4010-01066-06
7 4701-00004-00
8
A-12111
9
FL-11630
10 4006-01017-04
11 01-7695
12 10-376
13 B-10655-R
a)
02-4179
b) 4010-010S6-14
c) 4700-00023-00
d) 4701-00004-00
e) 4410-01132-00
1)
A-l0656"
1.) 02-4219
2.) 20-9370-1
3.) 03-S050-1
g)
8-10657-R
1.) 01-S073-R
2.) 17-1037
3.) 4010-01066-18
4.) 4410-011 27-00
5.) 4700-00107-00
6.) 4701-00004-00
7.) RM-23-06
14 23-6577
15 03-7568
16 4006-01005-06
17 4406-01117-00
18 C-11627-R
19 06-14G
20 Not Used
21 Not Used
22 Not Used
23 4105-01019-10
24 4701-00002-00
25 23-6622
26 03-7811
•• - also see separate diagram
Description
Wire, 1S AWG, Blue
Ty-Wrap, Nylon
Speed nut, Tinnerman
Capacitor, 2.2 IlFd, 250V, 20%
Sleeve, Vinyl (Cap. leads)
Cap Screw, 10-32 x
3/8,
SH
Lockwasher, #10 split
Flipper Stop Assembly
Flipper Coil
(* - Refer to Note 3)
Mach. Screw, 6-32 x
1/4,
P-RH-S
Solenoid Bracket
Coil Plunger Spring
Crank Link Assembly
Link Spacer Bushing
Cap Screw, 10-32 x
7/S,
SH
Washer,
5/8
o.d. x
13/64
i. d. x 16 gao
Lockwasher, #10 split
Nut, 10-32 ESNA
Flipper Link Assembly
Coli Plunger
Spring Pin,
5/32
dia. x
7/16
Flipper Link
Flipper Crank Assembly, Right
Flipper Crank, Right
Crank Washer
Cap Screw, 10-32 x HIS, HCS
Nut, 10-32 Hex Hd,
Washer, 5/8 o.d. x
13/64
i. d. x 12 ga
Lockwasher, #1 0 split
Tubing, H. S.
1/4
DWP
Bumper Plug
Flipper Bushing
Mach. Screw, 6-32 x
3/8,
P-PH
Nut, 6-32 Hex
Flipper Base Assembly, R.
Insulating Blade
Sh. Metal Screw, #5 x 5/S, P-PH-A
Lockwasher, #6 split
Tape, Double-sided
End of Stroke (EOS) Switch
Lower Left Flipper
pin
C-11626-L-3
(Parts listed replace same Items of C-11626-R-3)
Item Part No.
Description
13 B-10655-L Crank Link Assembly
g)
B-10657-L Flipper Crank Assembly, left
1.)
01-S073-L Flipper Crank, Left
18 C-11627-L Flipper Base Assy, L.
20
Not Used
21
Not Used
Flipper Assembly Notes:
1 Each Flipper Assembly on the Lower Playfield (and the two
Lower Flipper Assemblies on the Upper Playfield) is mounted
beneath the playfield. in conjunction with the plastic Flipper
Paddle and Shaft (20-9250 -5) and flipper Rubber (23-6519-4) on
the upper side at the playlield . The Upper Flipper Assembly on
the Upper Playfield uses a plastic Flipper Paddle and Shalt
(C-11927 -5) and flipper Rubber (23-6553 -4).
2 The tip of the EOS Switch must travel 0.0150 (+ .010, - .000)
inch, before the contacts fully open, with the flipper in the actu-
ated position.
The EOS Switch contacts must have a gap of
0.062
(i
.015) incn. Adjustment
of the EOS Switch must be
made at a minimum distance of 0.25 inch trom the switch body.
3 Flipper Assembly C-11626-R -8 (upper right flipper on Mini-
Playfield) and C-11626·L-8 (upper lett flipper on Main Playtield)
use a Flipper Coil, FL-11753150V.
4 All moving elements of the assembly must operate freely. with
no evidence at binding.
S The large end of the Coil Plunger Spring (item 12) must
tit
within
the four lugs of the Soleno id Bracket.
6 For coil replacement , remove the Solenoid Bracket (item 11) to
prevent screw damage .
7 Use Loclite'" 242 When reattaching screws to the Flipper Stop
Assembly, the Solenoid Bracket. and the Flipper Bushing.
8 When replacing the Bumper Plug (item 14) to restore proper
flipper operation, readjust the flipper paddle and shaft position.
9 Solid color blue wire connects to the banded end of each diode,
mounted on the connector end at the Flipper Coil (item 9). Trace
color wire connects to the unbanded end of the diode.
TAXI 46
- - - -_
..
_
..
_
. . . .
_._--.