Basic HTML Version
Backup H.S.T.D. 2
The operator can set the second Back-up High Score value. The game
automatically restores this value when the High Score Reset Every value is
reached. The range of this setting is 00 to 999, 000, 000.
Backup H.S.T.D. 3
The operator can set the third Back-up High Score value. The game
automatically restores this value when the High Score Reset Every value is
reached. The range of this setting is 00 to 999,000,000.
Backup H.S.T.D.
4
The operator can set the fourth Back-up High Score value. The game
automatically restores this value when the High Score Reset Every value is
reached. The range of this setting is 00 to 999, 000, 000.
Press the Up button to advance to the next desired Adjustment Group, (or press the Down button
to return to a previous Adjustment Group). Press the Enter button to activate that group. Press
the Up or Down button to cycle through the available adjustments in that group.
A.4 12
A.4 13
A.4 14
A5
Printer Adjustments
(optional board required)
A.5 01
A.5 02
A.5
oa
A.5
()4.
A.5
as
A.5 06
Column Width
Choose the column width to be printed. The range of this setting is 22 to 80.
Lines Per Page
Choose the amount of lines per page. The range of this setting is 20 to 80.
Pause Every Page
Choose whether the printer pauses at the end of a page. The choices are:
Yes
The printer does pause.
No
The printer doesn't pause.
Printer Type
Select the type of printer. The choices are: Parallel, Serial or ADP.
Serial Baud Rate
Select which baud rate to use for serial or ADP communications (bit rate). The
choices are 300, 600, 1200, 2400. 4800, or 9600.
Serial D.T.R. (Data Terminal Ready)
When a serial printer is used, this line may be connected to a printer output line
signaling that the printer is busy.
Normal
Normal D.T.R. signal goes low to indicate the printer is
not ready.
Inverted D.T.R (busy) signal goes high to indicate the
printer is not ready.
Inverted
Ignore
D.T.R signal is ignored.
Press the Escape button to return to the Adjustments Menu. Then, either press the Up or Down
button to return to a previous Adjustments Menu Group, or press the Escape button again to
return to the Main Menu. Once in the Main Menu either use the Up or Down buttons to return to
a previous menu selection, or press the Escape button again to return to the Attract Mode.
Hurricane 1-35