Troll sensitivity (Recording it has been hit)

[langep]

Can someone please tell me how to adjust the Troll sensitivity? The troll on the right side of my mmr has to be hit strait on and really hard and even that sometimes doesn’t register. The one on the left needs but a normal hit to register.  Any advice would be appreciated.

[Lloyd Olson]

You might need to remove the troll to do this. One hex head screw secures it to the plunger shaft. One connector. Then lift up and out the top of the playfield, wiggle and lean to get it through the hole in the playfield. It is hard to hold the troll up and try and adjust when in the game. It can be done if you are real handy.

Now the Troll face is on the front blade of a leaf blade switch. You'd need to bend the leaf behind it that it hits a little closer to the leaf blade the troll face is on.

LTG : )

[langep]

Thanks I will give that a try.

[Metal Man]

I just did the troll sensitivity adjustment and it is really easy to do so don't be afraid all. Best way is to remove it and work it on the bench.
PS: To get the left one out, you need to remove the wire form (also easy).