Lloyd I have a question that I figured inside people such a yourself would be able to answer and that is about the components and parts for this game and the others to come .
The question I have is , are the vendors from the last game MMR doing the prep stage components for this game , my concern as many others have outlined in the 1st showing of the new AFMR in what ever venue it was shown at and the point here is the playfield and yes I did look at the playfield and what others had mentioned on the "chipping aspect" ....normal play does not account for such severe chipping I should know as my MMR has over 500 plays and no problems at all noticed on the playfield at all ...including heavy bashing going through the castle ..
So if by chance a machine runs 50 games ,like on this AFMR and it starts showing signs of the severity of the playfield chipping as shown on the 3 or so machines shown at the show ...are we to take this as "Normal play" ..
![Huh ???](http://www.planetarypinball.com/forum/Smileys/default/huh.gif)
Just asking as let me tell you and Chicago gaming , I get flaking and chipping on my new 10K + machine within a few months , Yes I maybe pissed ..
So my question is are these playfields being manufactured at the same facility and manufacture as the MMR ..??
Just a question of concern ,, no this is not a Mercedes , but it is 10K + and I am looking for a little bit of endurance, reliability and wear .
Yes up here to the North of you all its a bit different to purchase one of these and its like getting a mortgage for a home ..to be frank its just over 13K including tax's and delivery .. so yes I would like something without issues .
Just a point of view and a reasonable question that should be easy to answer .