Where to pull 12V?

[glasairpilot]

Is there anywhere in MMR to safely pull 12V accessory power?  With my pre-spike Sterns I use the 12V plug provided and a 8-way splitter from Pinball Life and the Spike units get it from the 48V output and the step down transformer and splitter from Pinball Life as well. 


I would like to add undercab lighting and lit flipper buttons.  Not much current draw, but want it to be safe for the machine.

[cataylox]

did you ever find a good source for the 12V?

[glasairpilot]

Yep,


Forgot that I had a manual with schematics.  Right two lugs of the power supply unit.  Should work fine for low current draw stuff.

[FirstKnight]

Glasairepilot mentioned the two right lugs of the power supply should work fine for low current draws.


Any chance someone can post a picture of exact place on the power supply to connect the 12V wires (red and black)?


I have an MM Topper and want to make sure that I don't want to make a mistake when connecting. 


Thanks a ton!

[glasairpilot]

I don't have a schematic with me, but if you put a voltmeter on the lugs you should be able to tell which ones.