• December 26, 2024, 02:40:18 PM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.

Author Topic: Diverter on right ramp stuck down  (Read 17135 times)

Offline mizzou

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 25
  • Karma: +0/-0
    • View Profile
Diverter on right ramp stuck down
« on: February 08, 2016, 12:59:16 PM »
I've run into an issue with the right ramp. It seems the diverter by the damsel hole is stuck down so the ball will always go into the top right where the damsel shot is and not around the loop as it should the first few times. Has anyone else encountered this issue? Any suggested or known fixes? No error comes up in the boot up.

-Dan

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Diverter on right ramp stuck down
« Reply #1 on: February 08, 2016, 01:22:48 PM »
You wouldn't get an error. The game doesn't know what a diverter is.

I'd check the coil end of things to see where it is binding first. Then the ramp. Could be something loose, bad coil sleeve. Not a lot there so should be easy to sort out.

LTG : )

Offline ScottM

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 56
  • Karma: +1/-1
    • View Profile
Re: Diverter on right ramp stuck down
« Reply #2 on: February 08, 2016, 03:46:42 PM »
On my machine, I found that the diverter gate interfered with the slit in the ramp.  Fix involved carefully bending the diverter gate.

Offline mizzou

  • PPS Forum Member
  • One Star Member
  • *
  • Posts: 25
  • Karma: +0/-0
    • View Profile
Re: Diverter on right ramp stuck down
« Reply #3 on: February 09, 2016, 11:36:42 PM »
Yep, it was getting stuck on the ramp. Issue fixed. Thanks!