This issue was brought to my attention on pinside so I checked out mine. Damage has been done. Do I need to contact cgc directly? Thanks
There are 3 screws holding it. So there is no give. Holes would likely have to be filled then new pilot holes be drilled since the new holes would be too close to the originals. Then there is still the damaged Playfield after that.
You are not allowed to view links. Register or LoginThere are 3 screws holding it. So there is no give. Holes would likely have to be filled then new pilot holes be drilled since the new holes would be too close to the originals. Then there is still the damaged Playfield after that.It's currently hitting the wood, and will only move farther as the coil stop wears -- and you really think you'd move it so minimally that the holes would hit each other?
Rick that's great that it's an easy fix going forward, but what about the rest of us that already have damaged playfields?
You are not allowed to view links. Register or LoginRick that's great that it's an easy fix going forward, but what about the rest of us that already have damaged playfields?A populated playfeild is the only thing that is going to make this right. I have faith the right thing will be done.