• December 27, 2024, 01:17:21 PM

Login with username, password and session length

NOTE: This forum is for respectful dialog and it's content is meant to be kept on this site - so please be respectful and please do not copy content to other sites.
« previous next »
Pages: [1]   Go Down

Author Topic: Blown fuse (Gate) and wrong specification ?  (Read 17227 times)

Offline Leo

  • PPS Forum Member
  • Two Star Member
  • *
  • Posts: 72
  • Karma: +1/-1
    • View Profile
Blown fuse (Gate) and wrong specification ?
« on: May 02, 2015, 03:27:03 PM »
Hi,


The gate of the castle stopped working today and logically I looked at the documentation to find a fuse.
There is one, specified in the manual as 4A 250V Slow Blow.


On the playfield board, I found the gate fuse and took it off, and yes it was blown. But it's a "T2L 250V", which is if I' not wrong a 2A fuse !!!


Who's right ? The manual and the fuse installed was wrong ? Or the fuse, and in that case the manual is wrong and an erratum must be published ?


Thanks.
Leo.
Logged

Offline Lloyd Olson

  • LTG : )
  • Global Moderator
  • Three Star Member
  • *****
  • Posts: 385
  • Karma: +18/-7
    • View Profile
Re: Blown fuse (Gate) and wrong specification ?
« Reply #1 on: May 02, 2015, 05:55:25 PM »
The manual is right. And the board is marked 4 A.

No idea how the wrong fuse got in your game.

The fuse you need is a 4 amp slow blow ( time delayed ).

LTG : )
Logged
Pages: [1]   Go Up
« previous next »