Messages

1

MMR Support [MMR Members Only] / Ball Clipping Right Post During Multiball

« on: January 14, 2017, 05:58:46 PM »

This might be hard to explain.

I keep running into an issue where, during multiball, the balls often clip the right post/rubber when rolling down, activating the switch and causing the balls to get shot to the left. This usually doesn't happen when a single ball rolls down the right side during regular gameplay. It cleanly rolls down to the right flipper. I have confirmed that the table is level. Any idea why this happens and if it is a normal quirk?

2

MMR Support [MMR Members Only] / Re: Diffuser Help...

« on: July 14, 2016, 10:26:25 PM »

Mine reduced the hotspots and helped make the text slightly more legible, but also made the faded ink all the more obvious.  Looks god awful compared to others I've seen.  But I'm not supposed to be negative, so yeah...

3

MMR Support [MMR Members Only] / Re: Diffuser Help...

« on: May 27, 2016, 06:10:06 PM »

Maybe one day someone will post a How To video. 

4

MMR Support [MMR Members Only] / Re: Diffuser Help...

« on: May 27, 2016, 12:07:39 PM »

I think it goes in a different place that I haven't located yet.  I don't know.  The instructions that they slapped together aren't very good.  I'm sure if you know your way around a pinball machine, it's not so bad.  But for someone like me who is still relatively new to all this, I don't think I can install it without recruiting outside help - which is a rather annoying expense that I wasn't anticipating when buying this game. 

5

MMR Support [MMR Members Only] / Diffuser Help...

« on: May 26, 2016, 04:31:53 PM »

I am in the process of installing my diffuser, starting with the smaller bits first and I have a couple of questions:

1 - If you look at the picture of L78 RIGHT, it has three screws and sits nice and flush against the bottom of the playfield.  However, the board for L78 LEFT only has two screws and one open hole.  Since both L78 styrene pieces have three holes, I thought maybe one of the screws fell out.  However, I see no indication that a screw was ever placed there, as there is no hole in the playfield.  As a result, the piece doesn't really sit flush.  Is this normal?

2 - In the instructions (at the end), it says to re-install L74 and L86 OVER the existing large piece of styrene.  I'm pretty sure these are the Shoot Again and the bottom king insert.  So, just to clarify, I'm supposed to install the big board first, and then install these smaller ones OVER it?  So you're basically doubling up on those inserts?  Seems kind of odd, or am I missing something here?

6

MMR Support [MMR Members Only] / Re: MMR diffuser installed

« on: April 09, 2016, 04:41:27 PM »

It's good to hear that the "fix" is effective.  From what I was told, CGC will be installing diffusers on future builds at their own discretion.  So, I guess if QC thinks it needs it, they do it.  If they think it doesn't, they don't.  Still, it looks like a real pain to install.