Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: mizzou on February 08, 2016, 12:59:16 PM

Title: Diverter on right ramp stuck down
Post by: mizzou on February 08, 2016, 12:59:16 PM
I've run into an issue with the right ramp. It seems the diverter by the damsel hole is stuck down so the ball will always go into the top right where the damsel shot is and not around the loop as it should the first few times. Has anyone else encountered this issue? Any suggested or known fixes? No error comes up in the boot up.

-Dan
Title: Re: Diverter on right ramp stuck down
Post by: Lloyd Olson on February 08, 2016, 01:22:48 PM
You wouldn't get an error. The game doesn't know what a diverter is.

I'd check the coil end of things to see where it is binding first. Then the ramp. Could be something loose, bad coil sleeve. Not a lot there so should be easy to sort out.

LTG : )
Title: Re: Diverter on right ramp stuck down
Post by: ScottM on February 08, 2016, 03:46:42 PM
On my machine, I found that the diverter gate interfered with the slit in the ramp.  Fix involved carefully bending the diverter gate.
Title: Re: Diverter on right ramp stuck down
Post by: mizzou on February 09, 2016, 11:36:42 PM
Yep, it was getting stuck on the ramp. Issue fixed. Thanks!