Planetary Pinball Forum!

Medieval Madness Remake (MMR) => MMR Support [MMR Members Only] => Topic started by: Tims3484 on October 06, 2015, 01:13:12 AM

Title: Ball trough having trouble launching ball into shooter lane
Post by: Tims3484 on October 06, 2015, 01:13:12 AM

every so often my game (#347) has a hard time launching the ball from the trough into the shooter lane. Sometimes 6 or 7 tries. Anyone had this issue? Is there a fix?

Title: Re: Ball trough having trouble launching ball into shooter lane
Post by: Pablito on October 06, 2015, 11:25:54 AM

Post # 160 here.


https://pinside.com/pinball/forum/topic/mmr-owners-club-all-things-mmr-discussed/page/4#post-2703525

Title: Re: Ball trough having trouble launching ball into shooter lane
Post by: Lloyd Olson on October 06, 2015, 01:43:17 PM

First, please go into the CGC adjustments and try lowering the coil strength, or raising it. To get into the CGC stuff, hold the escape button down 5 seconds or so and the game will go into them.

If that doesn't do it, the metal flap on the ball trough that diverts the ball to the shooter lane may need to be bent out a little.

This will help -  http://www.pinplay.com/5/adjusting_the_ball_trough_on_woz.html (http://www.pinplay.com/5/adjusting_the_ball_trough_on_woz.html)

While for the WOZ pinball, same basic ball trough, same basic issue if the ball hits the flap and goes back down.

LTG : )

Title: Re: Ball trough having trouble launching ball into shooter lane
Post by: Tims3484 on October 17, 2015, 10:57:33 AM

I will check it out. Thanks!